WAC 458-40-610
Timber excise tax -- Definitions. (1)
Introduction. The purpose of WAC 458-40-610 through 458-40-680 is to prescribe the policies and
procedures for the taxation of timber harvested from public
and private forest lands as required by RCW 84.33.010 through 84.33.096.
Unless the context clearly requires otherwise, the
definitions in this rule apply to WAC 458-40-610 through 458-40-680. In addition to the definitions
found in this rule, definitions of technical forestry terms
may be found in The Dictionary of Forestry, 1998, edited by
John A. Helms, and published by the Society of American
Foresters.
(2) Codominant trees. Trees whose crowns form the
general level of the main canopy and receive full light from
above, but comparatively little light from the sides.
(3) Competitive sales. The offering for sale of timber
which is advertised to the general public for sale at public
auction under terms wherein all qualified potential buyers
have an equal opportunity to bid on the sale, and the sale is
awarded to the highest qualified bidder. The term
"competitive sales" includes making available to the general
public permits for the removal of forest products.
(4) Cord measurement. A measure of wood with dimensions
of 4 feet by 4 feet by 8 feet (128 cubic feet).
(5) Damaged timber. Timber where the stumpage values
have been materially reduced from the values shown in the
applicable stumpage value tables due to damage resulting from
fire, blow down, ice storm, flood, or other sudden unforeseen
causes.
(6) Dominant trees. Trees whose crowns are higher than
the general level of the main canopy and which receive full
light from the sides as well as from above.
(7) Firewood. Commercially traded firewood is considered
scaled utility log grade as defined in subsection (14) of this
section.
(8) Forest-derived biomass. Forest-derived biomass
consists of tree limbs, tops, needles, leaves, and other woody
debris that are residues from such activities as timber
harvesting, forest thinning, fire suppression, or forest
health. Forest-derived biomass does not include scalable
timber products or firewood (defined in WAC 458-40-650).
(9) Harvest unit. An area of timber harvest, defined and
mapped by the harvester before harvest, having the same
stumpage value area, hauling distance zone, harvest
adjustments, harvester, and harvest identification. The
harvest identification may be a department of natural
resources forest practice application number, public agency
harvesting permit number, public sale contract number, or
other unique identifier assigned to the timber harvest area
prior to harvest operations. A harvest unit may include more
than one section, but harvest unit may not overlap a county
boundary.
(10) Harvester. Every person who from the person's own
land or from the land of another under a right or license
granted by lease or contract, either directly or by
contracting with others for the necessary labor or mechanical
services, fells, cuts, or takes timber for sale or for
commercial or industrial use. The term "harvester" does not
include persons performing under contract the necessary labor
or mechanical services for a harvester. In cases where the
identity of the harvester is in doubt, the department of
revenue will consider the owner of the land from which the
timber was harvested to be the harvester and the one liable
for paying the tax.
The definition above applies except when the United
States or any instrumentality thereof, the state, including
its departments and institutions and political subdivisions,
or any municipal corporation therein so fells, cuts, or takes
timber for sale or for commercial or industrial use. When a
governmental entity described above fells, cuts, or takes
timber, the harvester is the first person, other than another
governmental entity as described above, acquiring title to or
a possessory interest in such timber.
(11) Harvesting and marketing costs. Only those costs
directly and exclusively associated with harvesting
merchantable timber from the land and delivering it to the
buyer. The term includes the costs of piling logging residue
on site, and costs to abate extreme fire hazard when required
by the department of natural resources. Harvesting and
marketing costs do not include the costs of other
consideration (for example, reforestation, permanent road
construction), treatment to timber or land that is not a
necessary part of a commercial harvest (for example,
precommercial thinning, brush clearing, land grading, stump
removal), costs associated with maintaining the option of land
conversion (for example, county fees, attorney fees,
specialized site assessment or evaluation fees), or any other
costs not directly and exclusively associated with the
harvesting and marketing of merchantable timber. The actual
harvesting and marketing costs must be used in all instances
where documented records are available. When the taxpayer is
unable to provide documented proof of such costs, or when
harvesting and marketing costs can not be separated from other
costs, the deduction for harvesting and marketing costs is
thirty-five percent of the gross receipts from the sale of the
logs.
(12) Hauling distance zone. An area with specified
boundaries as shown on the statewide stumpage value area and
hauling distance zone maps contained in WAC 458-40-640, having
similar accessibility to timber markets.
(13) Legal description. A description of an area of land
using government lots and standard general land office
subdivision procedures. If the boundary of the area is
irregular, the physical boundary must be described by metes
and bounds or by other means that will clearly identify the
property.
(14) Log grade. Those grades listed in the "Official Log
Scaling and Grading Rules" developed and authored by the
Northwest Log Rules Advisory Group (Advisory Group). "Utility
grade" means logs that do not meet the minimum requirements of
peeler or sawmill grades as defined in the "Official Log
Scaling and Grading Rules" published by the Advisory Group but
are suitable for the production of firm useable chips to an
amount of not less than fifty percent of the gross scale; and
meeting the following minimum requirements:
(a) Minimum gross diameter -- two inches.
(b) Minimum gross length -- twelve feet.
(c) Minimum volume -- ten board feet net scale.
(d) Minimum recovery requirements -- one hundred percent of
adjusted gross scale in firm useable chips.
(15) Lump sum sale. Also known as a cash sale or an
installment sale, it is a sale of timber where all the volume
offered is sold to the highest bidder.
(16) MBF. One thousand board feet measured in Scribner
Decimal C Log Scale Rule.
(17) Noncompetitive sales. Sales of timber in which the
purchaser has a preferential right to purchase the timber or a
right of first refusal.
(18) Other consideration. Value given in lieu of cash as
payment for stumpage, such as improvements to the land that
are of a permanent nature. Some examples of permanent
improvements are as follows: Construction of permanent roads;
installation of permanent bridges; stockpiling of rock
intended to be used for construction or reconstruction of
permanent roads; installation of gates, cattle guards, or
fencing; and clearing and reforestation of property.
(19) Permanent road. A road built as part of the
harvesting operation which is to have a useful life subsequent
to the completion of the harvest.
(20) Private timber. All timber harvested from privately
owned lands.
(21) Public timber. Timber harvested from federal,
state, county, municipal, or other government owned lands.
(22) Remote island. An area of land which is totally
surrounded by water at normal high tide and which has no
bridge or causeway connecting it to the mainland.
(23) Scale sale. A sale of timber in which the amount
paid for timber in cash and/or other consideration is the
arithmetic product of the actual volume harvested and the unit
price at the time of harvest.
(24) Small harvester. A harvester who harvests timber
from privately or publicly owned forest land in an amount not
exceeding two million board feet in a calendar year.
(25) Species. A grouping of timber based on biological
or physical characteristics. In addition to the designations
of species or subclassifications defined in Agriculture
Handbook No. 451 Checklist of United States Trees (native and
naturalized) found in the state of Washington, the following
are considered separate species for the purpose of harvest
classification used in the stumpage value tables:
(a) Other conifer. All conifers not separately
designated in the stumpage value tables. See WAC 458-40-660.
(b) Other hardwood. All hardwoods not separately
designated in the stumpage value tables. See WAC 458-40-660.
(c) Special forest products. The following are
considered to be separate species of special forest products:
Christmas trees (various species), posts (various species),
western redcedar flatsawn and shingle blocks, western redcedar
shake blocks and boards.
(d) Chipwood. All timber processed to produce chips or
chip products delivered to an approved chipwood destination
that has been approved in accordance with the provisions of
WAC 458-40-670 or otherwise reportable in accordance with the
provisions of WAC 458-40-670.
(e) Small logs. All conifer logs harvested in stumpage
value areas 6 or 7 generally measuring seven inches or less in
scaling diameter, purchased by weight measure at designated
small log destinations that have been approved in accordance
with the provisions of WAC 458-40-670. Log diameter and
length is measured in accordance with the Eastside Log Scaling
Rules developed and authored by the Northwest Log Rules
Advisory Group, with length not to exceed twenty feet.
(f) Sawlog. For purposes of timber harvest in stumpage
value areas 6 and 7, a sawlog is a log having a net scale of
not less than 33 1/3% of gross scale, nor less than ten board
feet and meeting the following minimum characteristics: Gross
scaling diameter of five inches and a gross scaling length of
eight feet.
(g) Piles. All logs sold for use or processing as piles
that meet the specifications described in the most recently
published edition of the Standard Specification for Round
Timber Piles (Designation: D 25) of the American Society for
Testing and Materials.
(h) Poles. All logs sold for use or processing as poles
that meet the specifications described in the most recently
published edition of the National Standard for Wood
Poles -- Specifications and Dimensions (ANSI 05.1) of the
American National Standards Institute.
(26) Stumpage. Timber, having commercial value, as it
exists before logging.
(27) Stumpage value. The true and fair market value of
stumpage for purposes of immediate harvest.
(28) Stumpage value area (SVA). An area with specified
boundaries which contains timber having similar growing,
harvesting and marketing conditions.
(29) Taxable stumpage value. The value of timber as
defined in RCW 84.33.035(7), and this chapter. Except as
provided below for small harvesters and public timber, the
taxable stumpage value is the appropriate value for the
species of timber harvested as set forth in the stumpage value
tables adopted under this chapter.
(a) Small harvester option. Small harvesters may elect
to calculate the excise tax in the manner provided by RCW 84.33.073 and 84.33.074. The taxable stumpage value must be
determined by one of the following methods as appropriate:
(i) Sale of logs. Timber which has been severed from the
stump, bucked into various lengths and sold in the form of
logs has a taxable stumpage value equal to the actual gross
receipts for the logs, less any costs associated with
harvesting and marketing the timber.
(ii) Sale of stumpage. When standing timber is sold and
harvested within twenty-four months of the date of sale, its
taxable stumpage value is the actual purchase price in cash
and/or other consideration for the stumpage for the most
recent sale prior to harvest. If a person purchases stumpage,
harvests the timber more than twenty-four months after
purchase of the stumpage, and chooses to report under the
small harvester option, the taxable stumpage value is the
actual gross receipts for the logs, less any costs associated
with harvesting and marketing the timber. See WAC 458-40-626
for timing of tax liability.
(b) Public timber. The taxable stumpage value for public
timber sales is determined as follows:
(i) Competitive sales. The taxable stumpage value is the
actual purchase price in cash and/or other consideration. The
value of other consideration is the fair market value of the
other consideration; provided that if the other consideration
is permanent roads, the value is the appraised value as
appraised by the seller. If the seller does not provide an
appraised value for roads, the value is the actual costs
incurred by the purchaser for constructing or improving the
roads. Other consideration includes additional services
required from the stumpage purchaser for the benefit of the
seller when these services are not necessary for the
harvesting or marketing of the timber. For example, under a
single stumpage sale's contract, when the seller requires road
abandonment (as defined in WAC 222-24-052(3)) of constructed
or reconstructed roads which are necessary for harvesting and
marketing the timber, the construction and abandonment costs
are not taxable. Abandonment activity on roads that exist
prior to a stumpage sale is not necessary for harvesting and
marketing the purchased timber and those costs are taxable.
(ii) Noncompetitive sales. The taxable stumpage value is
determined using the department of revenue's stumpage value
tables as set forth in this chapter. Qualified harvesters may
use the small harvester option.
(iii) Sale of logs. The taxable stumpage value for
public timber sold in the form of logs is the actual purchase
price for the logs in cash and/or other consideration less
appropriate deductions for harvesting and marketing costs. Refer above for a definition of "harvesting and marketing
costs."
(iv) Defaulted sales and uncompleted contracts. In the
event of default on a public timber sale contract, wherein the
taxpayer has made partial payment for the timber but has not
removed any timber, no tax is due. If part of the sale is
logged and the purchaser fails to complete the harvesting,
taxes are due on the amount the purchaser has been billed by
the seller for the volume removed to date. See WAC 458-40-628
for timing of tax liability.
(30) Thinning. Timber removed from a harvest unit
located in stumpage value area 1, 2, 3, 4, 5, or 10:
(a) When the total volume removed is less than forty
percent of the total merchantable volume of the harvest unit
prior to harvest; and
(b) The harvester leaves a minimum of one hundred
undamaged, evenly spaced, dominant or codominant trees per
acre of a commercial species or combination thereof.
[Statutory Authority: RCW 82.32.300, 82.01.060(2), and84.33.096
. 10-07-040, § 458-40-610, filed 3/10/10, effective
4/10/10. Statutory Authority: RCW 82.01.060(2), 82.32.300,84.33.096
, and 84.33.091. 09-14-108, § 458-40-610, filed
6/30/09, effective 7/31/09. Statutory Authority: RCW 82.32.300, 82.01.060(2), and 84.33.096. 06-17-186, §
458-40-610, filed 8/23/06, effective 9/23/06; 06-02-007, §
458-40-610, filed 12/22/05, effective 1/22/06; 05-08-070, §
458-40-610, filed 3/31/05, effective 5/1/05. Statutory
Authority: RCW 82.32.300 and 84.33.096. 02-21-005, §
458-40-610, filed 10/3/02, effective 11/3/02; 00-24-068, §
458-40-610, filed 12/1/00, effective 1/1/01. Statutory
Authority: RCW 82.32.330, 84.33.096 and 84.33.091. 96-02-054, § 458-40-610, filed 12/29/95, effective 1/1/96. Statutory Authority: RCW 82.32.330 and 84.33.096. 95-18-026,
§ 458-40-610, filed 8/25/95, effective 8/25/95. Statutory
Authority: RCW 84.33.096 and 82.32.300. 90-14-033, §
458-40-610, filed 6/29/90, effective 7/30/90. Statutory
Authority: Chapter 84.33 RCW. 87-02-023 (Order 86-4), §
458-40-610, filed 12/31/86.]