WAC 296-863-40020   Meet these requirements when the operator leaves the normal operating position.  

     You must:

     • Make sure operators do the following when getting off the PIT:

     – Fully lower the load engaging means.

     – Neutralize the controls.

     – Set the brakes.

     • Make sure operators do the following when leaving a PIT unattended:

     – Fully lower the load engaging means.

     – Neutralize the controls.

     – Shut off power.

     – Set the brakes.

     – Block the wheels, if parked on an incline.

Note:	A PIT is unattended when the operator:
	• Is more than twenty-five feet away;
	OR
	• Can not see the PIT.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 04-19-051, § 296-863-40020, filed 9/14/04, effective 2/1/05.]