WAC 296-807-18020   Use specific safety guards for machines using Type 1 grinding wheels, cutting-off wheels, and tuck pointing wheels.  

     You must:

     • Make sure the safety guard covers the top and sides of the wheel for at least one hundred eighty degrees.

Note:

It is not required to cover the spindle end, nut and outer flange.

[Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050 , and [49.17].060. 03-09-009, § 296-807-18020, filed 4/4/03, effective 8/1/03.]