WAC 296-807-15035   Make sure the tool is appropriate to the job.  

     You must:

     (1) Use the lowest velocity class of tool and load that will properly set the fastener.

     (2) Use the proper shield, fixture, adaptor, or accessory that is:

     • Suitable for the job

     • Recommended and supplied by the manufacturer.



[Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050 , and [49.17].060. 03-09-009, § 296-807-15035, filed 4/4/03, effective 8/1/03.]