WAC 296-806-30022   Safeguard projections on moving parts.  

     You must:

     • Safeguard projections on moving parts such as keys, setscrews, bolts, and nuts, by:

     – Removing them.

     – Making them flush.

     – Guarding with metal covers.

Exemption:	This requirement does not apply to keys or setscrews that are:
	• Within an enclosure.
	• Below the plane of the rim of a pulley that is less than twenty inches in diameter.
	• Located where employee contact is not possible.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-30022, filed 6/29/04, effective 1/1/05.]