WAC 296-803-500   Summary.  

     Your responsibility:

     To make sure energy control procedures are used and include these requirements.

     You must:

     ENERGY CONTROL PROCEDURES

     WAC 296-803-50005 Use energy control procedures.

     APPLYING LOCKOUT OR TAGOUT DEVICES

     WAC 296-803-50010 Meet these requirements when applying lockout or tagout devices.

     WAC 296-803-50015 Meet these additional requirements when applying lockout devices.

     WAC 296-803-50020 Meet these additional requirements when applying tagout devices.

     STORED ENERGY

     WAC 296-803-50025 Protect employees from the hazards of stored and residual energy.

     VERIFYING MACHINE ISOLATION

     WAC 296-803-50030 Verify that the machine or equipment is safe before starting work.

     REMOVING ENERGY CONTROL DEVICES

     WAC 296-803-50035 Meet these requirements when removing lockout or tagout devices and energizing the machine or equipment.

     TEMPORARY ENERGIZATION

     WAC 296-803-50040 Meet these requirements if it's necessary to temporarily energize a machine, equipment, or component for testing or positioning.

     SHIFT OR PERSONNEL CHANGES

     WAC 296-803-50045 Protect employees during shift or personnel changes.

     GROUP LOCKOUT/TAGOUT

     WAC 296-803-50050 Protect employees working in a group.

     WAC 296-803-50055 Meet these additional requirements if more than one group is used.

     OUTSIDE EMPLOYEES

     WAC 296-803-50060 Coordinate with outside employers servicing or maintaining your machines or equipment.



[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-15-105, § 296-803-500, filed 7/20/04, effective 11/1/04.]