WAC 296-150I-0160   Installer certification tag -- Placement -- Removal.  (1) The installer certification tag must be placed on the home upon completion of the installation and prior to inspection by the local enforcement agency.

     (2) The installer certification tags must be placed on the end of a home section directly above or below the HUD certification tag or temporarily located in plain sight within three feet of the home's front entry.

     (3) The local enforcement agency may not issue final approval of a home installation until one or more installer certification tags have been affixed to the home indicating all installation work was performed by a certified manufactured home installer.

EXCEPTION:

Installation work performed by a homeowner on his or her own residence does not require an installer certification tag.

     (4) The installer certification tag must be removed only by the owner of the home following final approval of the installation of the home by the local enforcement agency.



[Statutory Authority: Chapter 43.22A RCW and 2007 c 432. 08-12-040, § 296-150I-0160, filed 5/30/08, effective 6/30/08.]