WAC 296-127-01310 Carpenters. For the purpose of the Washington state public works law, chapter 39.12 RCW, carpenters construct, erect, install and repair structures, structural members and fixtures made of wood, plywood, wallboard and materials that take the place of wood, such as plastic, metals, composites, and fiberglass, using carpenter hand tools and power tools.

аааа The work includes, but is not limited to:

аааа Х Build rough wooden structures, such as concrete forms, scaffolds, wooden bridges, trestles, coffer dams, tunnel and sewer support; welding and burning.

аааа Х Install ladders, handrails, walkways, platforms and gangways.

аааа Х Install door and window bucks (rough frames in which finished frames are inserted) in building frame work and brace them with boards nailed to frame work.

аааа Х Install subflooring in buildings.

аааа Х Nail plaster grounds (wood or metal strips) to studding.

аааа Х Fit and nail sheathing on outer walls and roofs on buildings.

аааа Х Construct, erect, install and repair commercial, industrial and residential structures.

аааа Х Select specified type of lumber or other materials.

аааа Х Prepare layout, using rule, framing square and calipers.

аааа Х Mark cutting and assembling lines on materials, using pencil, chalk, and marking gauge.

аааа Х Shape materials to prescribed measurements, using saws, chisels and planes.

аааа Х Assemble, cut and shape materials and fasten them together with nails, dowel pins, or glue.

аааа Х Verify trueness of structure with plumb bob and carpenter's level.

аааа Х Apply decorative paneling to walls.

аааа Х Erect frame work for structures and lay subflooring.

аааа Х Cover subfloor with building paper to keep out moisture and lay hardwood, parquet and wood-strip-lock floors by nailing floors to subfloor or cementing them to mastic or asphalt base.

аааа Х Build stairs and layout and install partitions and cabinets.

аааа Х Install metal roof decking and metal siding, regardless of the fastening method, or what it is fastened to.

аааа Х Install all other types of siding, regardless of composition, fastening method, or what it is fastened to.

аааа Х Fit and install prefabricated wooden cabinets, window frames, door frames, doors, weather stripping, interior and exterior trim, and finish hardware, such as locks, letter drops and kick plates.

аааа Х Apply acoustical tile to ceilings and walls of buildings to reduce reflecting of sound and to decorate rooms.

аааа Х Cement tile to masonry surface.

аааа Х Nail channels or wood furring strips to surfaces to provide mounting for tile.

аааа Х Place building paper between tile and furring strip to keep out moisture.

аааа Х Nail, screw, or staple tile to wooden furring strips.

аааа Х Nail or screw moulding to walls to support and seal joint between ceiling tile and wall. Hang dry lines to wall mauling.

аааа Х Drive hanger inserts into reinforced concrete ceiling, suspend and bend hanger wires at points touching dry lines.

аааа Х Thread wires through holes in main runners and cut and attach cross supports to suspended runners and wall mauling.

аааа Х Cut tiles for fixtures and borders and insert tiles into supporting frame work.

[Statutory Authority: Chapter 39.12 RCW, RCW 43.22.270 and 43.22.051. 00-15-077, з 296-127-01310, filed 7/19/00, effective 7/19/00.]