WAC 296-24-24013   Rope inspection.  (1) Running ropes. A thorough inspection of all ropes in use shall be made at least once a month and a full written, dated, and signed report of rope condition kept on file where readily available. All inspections shall be performed by an appointed or authorized person. Any deterioration, resulting in appreciable loss of original strength, such as described below, shall be carefully noted and determination made as to whether further use of the rope would constitute a safety hazard:

     (a) Reduction of rope diameter below nominal diameter due to loss of core support, internal, or external corrosion or wear of outside wires.

     (b) A number of broken outside wires and the degree of distribution of concentration of such broken wires.

     (c) Worn outside wires.

     (d) Corroded or broken wires at end connections.

     (e) Corroded, cracked, bent, worn, or improperly applied end connections.

     (f) Severe kinking, crushing, cutting, or unstranding.

     (2) Other ropes.

     (a) Heavy wear and/or broken wires may occur in sections in contact with equalizer sheaves or other sheaves where rope travel is limited, or with saddles. Particular care shall be taken to inspect ropes at these locations.

     (b) All rope which has been idle for a period of a month or more due to shut down or storage of a crane on which it is installed shall be given a thorough inspection before it is placed in service. This inspection shall be for all types of deterioration and shall be performed by an appointed or authorized person whose approval shall be required for further use of the rope. A written and dated report of the rope condition shall be available.

     (c) Particular care shall be taken in the inspection of nonrotating rope.



[Order 73-5, § 296-24-24013, filed 5/9/73 and Order 73-4, § 296-24-24013, filed 5/7/73.]