WAC 246-359-600   Alternate construction.  (1) The department will allow alternate construction to the requirements stated in WAC 246-359-200 through 246-359-440 of this chapter when the plans are designed and stamped by an engineer or architect licensed to practice in the state of Washington.

     (2) Any changes in the structural design must be stamped by an engineer including:

     (a) Fixed construction, which cannot be dismantled and stored. Such fixed construction must comply with the structural requirements of the state building code, for example, wind forces, seismic forces, snow load, live load, and dead load.

     (b) Nonfixed construction which can be dismantled and stored for use when ice or snow exceed the snow loads stated in this chapter. Such nonfixed construction must comply with the structural requirements of the state building code, for example, wind forces, seismic forces, live load, and dead load with the exception of snow loads.

     (3) To determine compliance with this section the department may require a special inspector to conduct special inspections.



[Statutory Authority: RCW 70.114A.081. 99-03-065, § 246-359-600, filed 1/18/99, effective 2/18/99.]