WAC 246-272A-0150   Transition from the list of approved systems and products to the registered list -- Distribution products.  (1) The department's list of approved systems and products shall:

     (a) Become static on September 15, 2005. Subsequent changes, additions or deletions to the list of approved systems and products will only be made when approved by the department based on completed applications received prior to September 15, 2005.

     (b) Remain in effect until March 15, 2007.

     (2) Distribution products not on the department's list of approved systems and products on September 15, 2005, and not otherwise eligible for inclusion on the list by submittal of a completed application prior to September 15, 2005, must be registered with the department under this chapter before being permitted by the local health officer.

     (3) Between September 15, 2005, and March 15, 2007, the local health officer may permit distribution products that are on the department's list of approved systems and products or registered by the department under the requirements of this chapter.

     (4) After March 15, 2007, local health officers may only permit those distribution products registered under the requirements of this chapter.

     (5) In order to be registered, manufacturers with distribution product models specified on the department's list of approved systems and products (excluding products being evaluated under the experimental systems program) on September 15, 2005, or subsequently added to the list as provided in subsection (1)(a) of this section, shall apply for product registration before March 15, 2007, using the following information:

     (a) Manufacturers may apply for registration using the information previously provided to the department in support of product approval application, without further professional engineer certification.

     (b) If product approval was based upon the performance information obtained through the department's former experimental systems program, the manufacturer may apply for registration as established by these rules using the performance test results obtained from their experimental system program, without further professional engineer certification. This provision is valid for only those models on the approved list of systems and products.

     (c) Manufacturers and distribution products shall meet all other requirements established in these rules for product registration.



[Statutory Authority: RCW 43.20.050. 05-15-119, § 246-272A-0150, filed 7/18/05, effective 9/15/05.]