WAC 173-422-100   Testing equipment maintenance and calibration.  (1) Unless alternative procedures have been approved or required by the department all equipment used in the inspection shall be calibrated and maintained according to the manufacturer's specifications and recommendations. Complete logs as approved by the department shall be kept for maintenance, repair, and calibration.

     (2) The procedures for equipment maintenance and calibration procedures described in (I) Steady-State Test Equipment of Appendix A-Calibrations, Adjustments and Quality Control of Subpart S-Inspection/Maintenance Program Requirements of Part 51 of chapter 1, Title 40 of the Code of Federal Regulations adopted November 1, 1992, shall be followed by all testing facilities unless equivalent procedures have been approved by the department.



[Statutory Authority: Chapter 70.120 RCW. 95-06-068 (Order 93-35), § 173-422-100, filed 2/28/95, effective 3/31/95; 93-10-062 (Order 91-46), § 173-422-100, filed 5/3/93, effective 6/3/93; 90-06-062, § 173-422-100, filed 3/6/90, effective 4/6/90. Statutory Authority: RCW 70.120.120, 43.21A.080, 70.94.331 and 70.94.141(1). 83-23-115 (Order DE 83-31), § 173-422-100, filed 11/23/83, effective 1/2/84. Statutory Authority: RCW 70.120.120. 82-02-027 (Order DE 81-32), § 173-422-100, filed 12/31/81; 80-03-070 (Order DE 79-35), § 173-422-100, filed 2/28/80.]