| 1. |
In, out, or local, per metric ton 1, 2 |
$0.150 |
| 2. |
Vessels (export or domestic), per metric
ton 1, 3, 4 |
$0.200 |
| 3. |
Trucks or containers, per truck or
container 1, 2 |
$30.00 |
| 4. |
Additional, nongrade determining factor
analysis, per factor 1 |
$3.00 |
| 1 |
The rates in the above section also apply to
services provided under federal criteria inspection
instructions, state established standards, and/or
other applicant defined criteria. |
| 2 |
Dockage breakdown is included in the basic
inspection fee. |
| 3 |
The metric ton vessel rate includes all additional
factor inspection services required by the load
order. All other additional factor inspection
services in AMA Table 1 are charged at the per
factor fee. |
| 4 |
Assessments for other tests, such as mycotoxin
analysis, provided during vessel loading will be
assessed at the per unit rates included in this fee
schedule. |
| 1. |
Trucks, containers, or tote lots, sampled
by USDA approved grain probe,
including factor only or sampling only
services, per truck, container, or tote lot |
$30.00 |
| 2. |
Railcars sampled by USDA approved
mechanical samplers, including factor
only or sampling only services, per
railcar |
$30.00 |
| 3. |
Railcars sampled by USDA approved
grain probe, including factor only or
sampling only services, per railcar |
$30.00 |
| 4. |
Inspection of bagged commodities,
including factor only or sampling only
services, per hundredweight (cwt) |
$0.080 |
| 5. |
Additional, nongrade determining factor
analysis, per factor |
$3.00 |
| Note: The following applies to all fees in this table: |
| ▪ |
Dockage breakdown is included in the basic
inspection fee. |
| ▪ |
Analysis for special grade requirements or criteria
analysis that requires additional equipment or
personnel will be provided at the hourly rate. |
| ▪ |
The rates shown above also apply to services
provided under federal criteria inspection
instructions. |
| 1. |
Submitted sample, thresher run or
processed, including factor-only
inspections, per sample |
$19.00 |
| 2. |
Additional, nongrade determining factor
analysis, per factor |
$3.00 |
| Note: The following applies to all fees in this table: |
| ▪ |
Dockage breakdown is included in the basic
inspection fee. |
| ▪ |
Analysis for special grade requirements or criteria
analysis that requires additional equipment or
personnel will be provided at the hourly rate. |
| ▪ |
The rates shown above also apply to inspection
services provided under federal criteria inspection
instructions. |
| ▪ |
When the size of a submitted sample is insufficient
to perform official grade analysis, factor-only
analysis is available on request of the applicant. |