WAC 468-95-310   Temporary pavement markings.  Amend MUTCD Section 6F.66 to read:

     Standard:

     All temporary pavement markings shall conform to the requirements of Chapters 3A and 3B. All temporary broken-line pavement markings shall use the same cycle length as permanent markings and be at least 0.6 m (2 ft) long.

     Support:

     Temporary pavement markings are those that may be used until it is practical and possible to install permanent markings.

     Option:

     Half-cycle lengths with a minimum of 0.6 m (2 ft) stripes may be used on roadways with severed curvature (see Section 3A.05) for center lines in passing zones and for lane lines.

     For temporary situations, for a two-lane or three-lane road, no-passing zones may be identified by using DO NOT PASS (R4-1), PASS WITH CARE (R4-2), and NO PASSING ZONE (W14-3) signs rather than pavement markings.

     Guidance:

     When used, the DO NOT PASS, PASS WITH CARE, and NO PASSING ZONE signs should be placed in accordance with Sections 2B.29, 2B.30, and 2C.35.



[Statutory Authority: Chapter 34.05 RCW and RCW 46.36.030. 05-23-003, § 468-95-310, filed 11/3/05, effective 12/4/05. Statutory Authority: Chapter 34.05 RCW and RCW 47.36.030. 03-06-053, § 468-95-310, filed 2/28/03, effective 3/31/03.]