WAC 212-17-370
Proximate display -- Definitions. For the
purpose of this section the following definitions are used:
(1) Aerial shell. Usually a cylindrical or spherical
cartridge containing pyrotechnic material, a long fuse or
electric match wires, and a black powder lift charge.
(2) Airburst. A pyrotechnic device that is suspended in
the air to simulate outdoor aerial fireworks shells without
producing hazardous debris.
(3) Binary system. A two-component pyrotechnic system.
(4) Black powder. A low explosive consisting of an
intimate mixture of potassium or sodium nitrate, charcoal, and
sulfur.
(5) Comet. A pellet of pyrotechnic composition that is
ignited and propelled from a mortar tube by a charge of black
powder.
(6) Concussion effect. A pyrotechnic effect that
produces a loud noise and a violent jarring shock for dramatic
effect.
(7) Concussion mortar. A device specifically designed
and constructed to produce a loud noise and a violent jarring
shock for dramatic effect without producing any damage.
(8) Electric match. A device containing a small amount
of pyrotechnic material that ignites when a specified electric
current flows through the leads. An electric match is used to
initiate pyrotechnics. Electric matches are often incorrectly
called squibs.
(9) Fallout radius. A line that defines the fallout area
of a pyrotechnic device.
(10) Fixed production. Any production performed
repeatedly in only one geographic location.
(11) Flare. A pyrotechnic device designed to produce a
single source of intense light for a defined period of time.
(12) Flash pot. A device used with flash powder that
produces a flash of light and is capable of directing the
flash in an upward direction.
(13) Gerb. A cylindrical preload intended to produce a
controlled spray of sparks with a reproducible and predictable
duration, height, and diameter.
(14) Integral mortar. A preloaded mortar containing
pyrotechnic materials and intended for a single firing only.
(15) Lift charge. The composition in a pyrotechnic
device that propels the effect into the air when ignited.
(16) Manufacturer. An individual who performs the
following:
(a) Prepares any pyrotechnic material; and
(b) Loads or assembles any pyrotechnic device.
(17) Mine. A pyrotechnic device, usually a preload, that
projects multiple pellets of pyrotechnic material that produce
sparks or flame.
(18) Mortar. A tube or pot-like device used to direct
and control the effect of the pyrotechnic material.
(19) Proximate audience. An audience closer to
pyrotechnic devices than permitted by WAC 212-17-325.
(20) Pyrotechnic device. Any device containing
pyrotechnic materials and capable of producing a special
effect as defined in the section.
(21) Pyrotechnic material. (Articles pyrotechnic.) A
chemical mixture used in the entertainment industry to produce
visible or audible effects by combustion, deflagration, or
detonation.
(22) Pyrotechnic operator. (Special effects operator.) An individual who has responsibility for pyrotechnic safety
and who controls, initiates, or otherwise creates special
effects.
(23) Pyrotechnic special effect. A special effect
created through the use of articles pyrotechnic materials and
devices. (See also special effects.)
(24) Pyrotechnics. Controlled exothermic chemical
reactions that are timed to create the effects of heat, gas,
sound, dispersion of aerosols, emission of visible
electromagnetic radiation, or a combination of these effects
to provide the maximum effect from the least volume.
(25) Rocket. A pyrotechnic device that moves by the
ejection of matter produced by the internal combustion of
propellants.
(26) Saxon. A pyrotechnic device consisting of a tube
that rotates around a pivot point to produce a circular shower
of sparks.
(27) Special effect. A visual or audible effect used for
entertainment purposes, created exclusively by articles
pyrotechnic.
(28) Waterfall, falls, park curtain. An effect of a
cascade of sparks usually produced by multiple devices fired
simultaneously.
(29) Wheel. A pyrotechnic device that rotates on a
central axis consisting of multiple gerbs or rockets attached
to a framework.
[Statutory Authority: Chapters 43.43 and 70.77 RCW. 05-12-033, § 212-17-370, filed 5/24/05, effective 6/24/05.]