WAC 173-423-040
Definitions and abbreviations. The
following definitions apply to the administration of this
chapter. Any term that is not defined in this section shall
be as defined or described in the California Code of
Regulations, Title 13, section 1900. Definitions in the
California Code of Regulations, Title 13, section 1900 will
prevail if any discrepancy arises between them and those set
forth in this section.
(1) "Emission credits" are earned when a manufacturer's
reported fleet average is less than the required fleet
average. Credits are calculated according to formulas
contained in the California Code of Regulations, Title 13,
section 1961(c) and 1961.1(b).
(2) "Emission debits" are earned when a manufacturer's
reported fleet average exceeds the required fleet average.
Debits are calculated according to formulas contained in the
California Code of Regulations, Title 13, section 1961(c) and
1961.1(b).
(3) "Fleet average greenhouse gas emission requirements"
are generally referred to as limitations on greenhouse gas
exhaust mass emission values from passenger cars, light-duty
trucks and medium-duty passenger vehicles. The fleet average
greenhouse gas emission requirements are set forth in CCR,
Title 13, section 1961.1, and incorporated herein by
reference.
(4) "Gross vehicle weight rating" or "GVWR" is the value
specified by the manufacturer as the maximum design loaded
weight of a single vehicle.
(5) "Independent low volume manufacturer" is defined in
the California Code of Regulations, Title 13, section 1900 and
incorporated herein by reference.
(6) "Intermediate volume manufacturer" is defined in the
California Code of Regulations, Title 13, section 1900 and
incorporated herein by reference.
(7) "Large volume manufacturer" is defined in the
California Code of Regulations, Title 13, section 1900 and
incorporated herein by reference.
(8) "Light duty truck" is any 2000 and subsequent model
motor vehicle certified to the standards in Title 13, CCR,
section 1961 (a)(1) rated at 8,500 pounds gross vehicle weight
or less, and any other motor vehicle rated at 6,000 pounds
gross vehicle weight or less, which is designed primarily for
the purposes of transportation of property or is a derivative
of such vehicle, or is available with special features
enabling off-street or off-highway operation and use.
(9) "Medium duty passenger vehicle" (MDPV) is any
medium-duty vehicle with a gross vehicle weight rating of less
than 10,000 pounds that is designed primarily for the
transportation of persons. The medium-duty passenger vehicle
definition does not include any vehicle which:
(a) Is an "incomplete truck," i.e., is a truck that does
not have the primary load carrying device or container
attached; or
(b) Has a seating capacity of more than twelve persons;
or
(c) Is designed for more than nine persons in seating
rearward of the driver's seat; or
(d) Is equipped with an open cargo area of 72.0 inches in
interior length or more. A covered box not readily accessible
from the passenger compartment will be considered an open
cargo area for the purpose of this definition.
(10) "Model year" is the manufacturer's annual production
period which includes January 1 of a calendar year. If the
manufacturer has no annual production period, "model year" is
the calendar year. In the case of any vehicle manufactured in
two or more stages, the time of manufacture shall be the date
of completion of the chassis.
(11) "Nonmethane organic gas" or "NMOG" is the sum of
nonoxygenated and oxygenated hydrocarbons contained in a gas
sample as measured in accordance with the "California
Non-Methane Organic Gas Test Procedures," and incorporated
herein by reference.
(12) "NMOG fleet average emissions" is a motor vehicle
manufacturer's average vehicle emissions of all nonmethane
organic gases from passenger cars and light duty trucks in any
model year delivered in Washington that are subject to this
regulation.
(13) "Passenger car" is any motor vehicle designed
primarily for transportation of persons and having a design
capacity of twelve persons or less.
(14) "Small volume manufacturer" is defined as set forth
in the California Code of Regulations, Title 13, section 1900
and incorporated herein by reference.
[Statutory Authority: RCW 70.120A.010. 05-24-044, §
173-423-040, filed 11/30/05, effective 12/31/05.]