RCW 82.04.4463
Credit -- Property and leasehold taxes paid on property used for manufacture of commercial airplanes. (Expires July 1, 2024.)

(1) In computing the tax imposed under this chapter, a credit is allowed for property taxes and leasehold excise taxes paid during the calendar year.

     (2) The credit is equal to:

     (a)(i)(A) Property taxes paid on buildings, and land upon which the buildings are located, constructed after December 1, 2003, and used exclusively in manufacturing commercial airplanes or components of such airplanes; and

     (B) Leasehold excise taxes paid with respect to buildings constructed after January 1, 2006, the land upon which the buildings are located, or both, if the buildings are used exclusively in manufacturing commercial airplanes or components of such airplanes; and

     (C) Property taxes or leasehold excise taxes paid on, or with respect to, buildings constructed after June 30, 2008, the land upon which the buildings are located, or both, and used exclusively for aerospace product development or in providing aerospace services, by persons not within the scope of (a)(i)(A) and (B) of this subsection (2) and are: (I) Engaged in manufacturing tooling specifically designed for use in manufacturing commercial airplanes or their components; or (II) taxable under RCW 82.04.290(3) or 82.04.250(3); or

     (ii) Property taxes attributable to an increase in assessed value due to the renovation or expansion, after: (A) December 1, 2003, of a building used exclusively in manufacturing commercial airplanes or components of such airplanes; and (B) June 30, 2008, of buildings used exclusively for aerospace product development or in providing aerospace services, by persons not within the scope of (a)(ii)(A) of this subsection (2) and are: (I) Engaged in manufacturing tooling specifically designed for use in manufacturing commercial airplanes or their components; or (II) taxable under RCW 82.04.290(3) or 82.04.250(3); and

     (b) An amount equal to:

     (i)(A) Property taxes paid, by persons taxable under RCW 82.04.260(11)(a), on machinery and equipment exempt under RCW 82.08.02565 or 82.12.02565 and acquired after December 1, 2003;

     (B) Property taxes paid, by persons taxable under RCW 82.04.260(11)(b), on machinery and equipment exempt under RCW 82.08.02565 or 82.12.02565 and acquired after June 30, 2008; or

     (C) Property taxes paid, by persons taxable under RCW 82.04.0250(3) [82.04.250(3)] or 82.04.290(3), on computer hardware, computer peripherals, and software exempt under RCW 82.08.975 or 82.12.975 and acquired after June 30, 2008.

     (ii) For purposes of determining the amount eligible for credit under (i)(A) and (B) of this subsection (2)(b), the amount of property taxes paid is multiplied by a fraction.

     (I) The numerator of the fraction is the total taxable amount subject to the tax imposed under RCW 82.04.260(11) (a) or (b) on the applicable business activities of manufacturing commercial airplanes, components of such airplanes, or tooling specifically designed for use in the manufacturing of commercial airplanes or components of such airplanes.

     (II) The denominator of the fraction is the total taxable amount subject to the tax imposed under all manufacturing classifications in chapter 82.04 RCW.

     (III) For purposes of both the numerator and denominator of the fraction, the total taxable amount refers to the total taxable amount required to be reported on the person's returns for the calendar year before the calendar year in which the credit under this section is earned. The department may provide for an alternative method for calculating the numerator in cases where the tax rate provided in RCW 82.04.260(11) for manufacturing was not in effect during the full calendar year before the calendar year in which the credit under this section is earned.

     (IV) No credit is available under (b)(i)(A) or (B) of this subsection (2) if either the numerator or the denominator of the fraction is zero. If the fraction is greater than or equal to nine-tenths, then the fraction is rounded to one.

     (V) As used in (III) of this subsection (2)(b)(ii)(C), "returns" means the tax returns for which the tax imposed under this chapter is reported to the department.

     (3) The definitions in this subsection apply throughout this section, unless the context clearly indicates otherwise.

     (a) "Aerospace product development" has the same meaning as provided in RCW 82.04.4461.

     (b) "Aerospace services" has the same meaning given in RCW 82.08.975.

     (c) "Commercial airplane" and "component" have the same meanings as provided in RCW 82.32.550.

     (4) A credit earned during one calendar year may be carried over to be credited against taxes incurred in a subsequent calendar year, but may not be carried over a second year. No refunds may be granted for credits under this section.

     (5) In addition to all other requirements under this title, a person taking the credit under this section must report as required under RCW 82.32.545.

     (6) This section expires July 1, 2024.

[2008 c 81 § 8; 2006 c 177 § 10; 2005 c 514 § 501; 2003 2nd sp.s. c 1 § 15.]

NOTES:

     Findings -- Savings -- Effective date -- 2008 c 81: See notes following RCW 82.08.975.

     Effective date -- 2006 c 177 §§ 10 and 11: "Sections 10 and 11 of this act take effect January 1, 2007." [2006 c 177 § 13.]

     Application -- 2006 c 177 § 10: "Section 10 of this act applies with respect to leasehold excise taxes paid on or after January 1, 2007." [2006 c 177 § 11.]

     Effective date -- 2005 c 514 §§ 501 and 1002: "Sections 501 and 1002 of this act take effect January 1, 2006." [2005 c 514 § 1305.]

     Part headings not law -- Severability -- 2005 c 514: See notes following RCW 82.12.808.

     Contingent effective date -- 2003 2nd sp.s. c 1: See RCW 82.32.550.

     Finding -- 2003 2nd sp.s. c 1: See note following RCW 82.04.4461.