Title 15
BUILDINGS AND CONSTRUCTION¹

Chapters:

15.04 Repealed

15.05 Construction Codes

15.06 Repealed

15.08 Repealed

15.10 House Numbering Requirements

15.12 Repealed

15.16 Repealed

15.20 Flood Damage Prevention

15.24 Repealed

15.28 Repealed

15.30 Repealed

Chapter 15.04
UNIFORM CODES

(Repealed by Ord. 1662)

Chapter 15.05
CONSTRUCTION CODES

Sections:

15.05.010 Purpose.

15.05.015 Definitions.

15.05.020 Copies of codes on file.

15.05.030 Fees.

15.05.035 Appeals.

15.05.040 Building code adopted.

15.05.050 Residential code adopted.

15.05.060 Existing building code adopted.

15.05.070 Plumbing code.

15.05.080 Mechanical code.

15.05.090 International Fuel Gas Code.

15.05.100 National Fuel Gas Code (NFPA 54).

15.05.110 Liquefied Petroleum Gas Code (NFPA 58).

15.05.120 Washington State Energy Code.

15.05.130 Ventilation and indoor air quality code.

15.05.135 Uniform Code for the Abatement of Dangerous Buildings.

15.05.140 Fire code.

15.05.150 Development guidelines and public works standards.

15.05.010 Purpose.

The purpose of this chapter as adopted is to provide for and promote the health, safety, and welfare of the general public, and not to create or to otherwise establish or designate any particular class or group of persons who will or should be especially protected or benefited by the terms of this chapter.

A. The purpose of the international codes adoption chapter is to regulate construction and/or development of site work within the incorporated boundaries of the city of Milton. Further, it is the purpose of this chapter to adopt locally state-mandated laws and codes regulating construction in order to promote the health, safety and welfare of the occupants or users of buildings and structures and the general public as a whole by enforcement of building codes throughout this jurisdiction.

B. It is also the purpose of this title, through enforcement of referenced codes, to regulate the safe and proper function of elements of a site or site improvement work and essential systems of a building including structural framing, plumbing, and sanitation, water conservation, heating, air conditioning, ventilation, energy efficiency, safe and equal access, fire suppression systems, alarm systems, and fire department access. (Ord. 1662 § 4, 2006).

15.05.015 Definitions.

Whenever reference is made to local authority, codes, jurisdiction and similar concepts within the codes adopted by reference in this chapter, interpretations rendered by such reference shall apply to the city of Milton and its jurisdiction and authority. Whenever the following words appear in the codes adopted by reference in this chapter, they are to be interpreted as follows:

A. “Administrative authority” shall mean “building official.”

B. “Fire chief” shall mean either “fire code official” or “fire marshal” as the context requires.

C. “Corporation counsel” shall mean “city attorney or designee.”

D. “City treasurer” shall mean “finance director.”

E. “Local zoning code” shall mean MMC Title 17, Zoning.

F. “Municipality,” “city” and “jurisdiction” shall mean the “city of Milton.” (Ord. 1662 § 4, 2006).

15.05.020 Copies of codes on file.

The city shall at all times keep on file with the city clerk, for reference by the general public, not less than one copy of the adopted codes and resolutions, or parts thereof, as herein adopted by reference, together with the amendments and supplements thereto herein made a part of this chapter. The copy of codes on file may be placed by the city clerk in the custody of the office of the building official in order to make them more readily available for inspection and use by the general public. (Ord. 1662 § 4, 2006).

15.05.030 Fees.

Effective April 1, 2007, unless otherwise specified herein, fees associated with the implementation of these codes shall be established as set forth in Resolution 07-1712 or as hereinafter adopted. (Ord. 1702 § 3, 2007; Ord. 1662 § 4, 2006).

15.05.035 Appeals.

Where the adoption of these codes require a certain appeal body, requirement or process, the city hearing examiner shall serve as the hearing and decision-making authority for those codes, pursuant to the procedures set forth in Chapter 17.66 MMC, Appeals of Administrative Decisions. (Ord. 1662 § 4, 2006).

15.05.040 Building code adopted.

A. There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the International Building Code (IBC), 2006 Edition, as adopted by the State Building Code Council, Chapter 51-50 WAC, as published by the International Code Council together with Appendix Chapters H, Signs, and J, Grading, unless superseded by Chapter 13.26 MMC or sections of the Milton Municipal Code specifically addressing clearing, grading and filling.

B. IBC Section 114.4, Unauthorized tampering, shall be added to read as follows:

114.4 Unauthorized tampering. Stop work orders, signs, tags, notices or seals posted or affixed by a representative of the City shall not be mutilated, destroyed, tampered with, or removed without written authorization from the building official, stormwater compliance officer, or designee. The fine for the removal, mutilation, destruction of, or tampering with said order, notice, sign, tags, or seals shall be in accordance with the City’s most recently adopted fee schedule.

C. IBC Section 108.4 Amended. Section 108.4 is hereby amended to read as follows:

108.4 Work commencing before permit issuance. Any person who commences any work on a building, structure, gas, mechanical, or plumbing system or performs clearing and grading activities before obtaining the necessary permits shall be subject to a stop work order and assessed penalties and a special investigation fee, which shall be in accordance with the City’s most recently adopted fee schedule. The special investigation fee shall be in addition to the fees charged for obtaining the required permits.

D. IBC Section 1013, Guards, shall be amended to read as follows:

1013.1 Where required. Upon issuance of a building permit, guards shall be located along open-sided walking surfaces, mezzanines, industrial equipment platforms, stairways, ramps, landings and the top edge of any rockery, retaining wall or structure that is located more than 30 inches (762 mm) above the floor or grade below. Guards shall be adequate in strength and attachment in accordance with Section 1607.7. Where glass is used to provide a guard or as a portion of the guard system, the guard shall also comply with Section 2407. Guards shall also be located along glazed sides of stairways, ramps and landings that are located more than 30 inches (762 mm) above the floor or grade below where the glazing provided does not meet the strength and attachment requirements in Section 1607.7.

(Ord. 1708 § 1, 2007; Ord. 1705 § 1, 2007; Ord. 1702 §§ 4, 5, 6, 2007; Ord. 1669 § 1, 2006; Ord. 1662 § 4, 2006).

15.05.050 Residential code adopted.

A. There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the International Residential Code (IRC), 2006 Edition, as adopted by the State Building Code Council, Chapter 51-51 WAC, as published by the International Code Council together with the Appendix Chapters G, Swimming Pools, Spas and Hot Tubs, and J, Existing Buildings and Structures. Appendix Chapter G is hereby modified to increase the barrier height around swimming pools, spas and hot tubs to not less than 72 inches.

B. IRC Section 114.3, Unauthorized tampering, shall be added to read as follows:

114.3 Unauthorized tampering. Stop work orders, signs, tags, notices or seals posted or affixed by a representative of the City shall not be mutilated, destroyed, tampered with, or removed without written authorization from the building official, stormwater compliance officer, or designee. The fine for the removal, mutilation, destruction of, or tampering with said order, notice, sign, tags, or seals shall be in accordance with the City’s most recently adopted fee schedule.

C. IRC Section R301.2(1) Amended. Section R301.2(1) is hereby amended to read as follows:

R301.2(1) Climatic and Geographic Design Criteria:

Ground Snow Load: 25 psf

Wind Speed (mph): 85

Seismic Design Category: D1

Subject to Damage from Weathering: Moderate

Frost Line Depth: 12 inches

Termite: Slight to Moderate

Decay: Slight to Moderate

Winter Design Temp: 19°F

Ice Shield Underlayment Req.: No

Air Freezing Index: 160

Mean Annual Temperature: 51°F

Flood Hazard: Most current Flood Insurance Rate Map

D. IRC Section R108.4.2 Amended. Section R108.4.2 is hereby amended to read as follows:

R108.4.2 Work commencing before permit issuance. Any person who commences any work on a building, structure, gas, mechanical, or plumbing system before obtaining the necessary permits shall be subject to a stop work order and special investigation fee. The special investigation fee shall be in addition to the fees charged for obtaining the required permits.

(Ord. 1705 § 2, 2007; Ord. 1702 §§ 7, 8, 9, 2007; Ord. 1669 § 2, 2006; Ord. 1662 § 4, 2006).

15.05.060 Existing building code adopted.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the International Existing Building Code (IEBC), 2006 Edition, as adopted by the State Building Code Council, Chapter 51-50 WAC, as published by the International Code Council. (Ord. 1702 § 10, 2007; Ord. 1662 § 4, 2006).

15.05.070 Plumbing code.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the Uniform Plumbing Code (UPC), 2006 Edition, as adopted by the State Building Code Council in Chapters 51-56 and 51-57 WAC, as published by the International Association of Plumbing and Mechanical Officials. (Ord. 1702 § 10, 2007; Ord. 1662 § 4, 2006).

15.05.080 Mechanical code.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the International Mechanical Code (IMC), 2006 Edition, as adopted by the State Building Code Council in Chapter 51-52 WAC, as published by the International Code Council. (Ord. 1702 § 10, 2007; Ord. 1662 § 4, 2006).

15.05.090 International Fuel Gas Code.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the International Fuel Gas Code (IFGC), 2006 Edition, as adopted by the State Building Code Council in Chapter 51-52 WAC, as published by the International Code Council. (Ord. 1702 § 10, 2007; Ord. 1662 § 4, 2006).

15.05.100 National Fuel Gas Code (NFPA 54).

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the National Fuel Gas Code as adopted by the State Building Code Council in Chapter 51-52 WAC, as published by NFPA. (Ord. 1662 § 4, 2006).

15.05.110 Liquefied Petroleum Gas Code (NFPA 58).

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the Liquefied Petroleum Gas Code as adopted by the State Building Code Council in Chapter 51-52 WAC, as published by NFPA. (Ord. 1662 § 4, 2006).

15.05.120 Washington State Energy Code.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the Washington State Energy Code as adopted by the State Building Code Council in Chapter 51-11 WAC. (Ord. 1662 § 4, 2006).

15.05.130 Ventilation and indoor air quality code.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the Washington State Ventilation and Indoor Air Quality Code as adopted by the State Building Code Council in Chapter 51-13 WAC. (Ord. 1662 § 4, 2006).

15.05.135 Uniform Code for the Abatement of Dangerous Buildings.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the Uniform Code for the Abatement of Dangerous Buildings (UCADB), 1997 Edition, issued by the International Conference of Building Officials. (Ord. 1662 § 4, 2006).

15.05.140 Fire code.

There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, that certain code, known as the International Fire Code (IFC), 2003 Edition, as adopted by the state of Washington in Chapter 51-54 WAC, together with Appendixes B, Fire Flow Requirements for Buildings, and C, Fire Hydrant Location and Distribution. (Ord. 1662 § 4, 2006).

15.05.150 Development guidelines and public works standards.

A. There is adopted and by this reference made a part of this chapter as though fully set forth herein, at length, development guidelines and public works standards prepared by Gray & Osborne, Inc., for the city of Milton, a copy of which can be viewed at the public works department during business hours.

B. The public works director shall amend and update these guidelines and standards as needed to reflect changes in standards and to ensure that the standards used by the city reflect current engineering practices and serve the public interest. Notice of amendments shall be posted on the city’s website and shall specify an effective date, which shall be no less than five days after issuance of the notice except in case of emergency. All amendments shall be incorporated or appended to the development guidelines and public works standards.

C. In case of conflict between adopted standards, the more restrictive standard, as determined by the public works director, shall apply, unless otherwise required by law. (Ord. 1681 § 1, 2006).

Chapter 15.06
AUTOMATIC SPRINKLER SYSTEMS

(Repealed by Ord. 1662)

Chapter 15.08
SMOKE DETECTORS

(Repealed by Ord. 1662)

Chapter 15.10
HOUSE NUMBERING REQUIREMENTS

Sections:

15.10.010 Purpose.

15.10.020 Requirements – All new structures.

15.10.030 Maintenance.

15.10.040 Violation – Penalty.

15.10.010 Purpose.

The purpose of this chapter is to promote and to protect the public health, safety, and general welfare of the people of Milton and to further assist any emergency vehicle in the location of addresses in an emergency situation. (Ord. 1085 § 1, 1988).

15.10.020 Requirements – All new structures.

All new construction shall have addressing numbers of not less than four inches in height and that shall be of such color as to contrast with the background and further to be placed in such a manner that will be plainly visible at night. (Ord. 1085 § 1, 1988).

15.10.030 Maintenance.

It is the responsibility of the property owner to maintain either the numbers on the structure or the post with the numbers. (Ord. 1085 § 1, 1988).

15.10.040 Violation – Penalty.

Violation of any of the terms of this chapter is a misdemeanor, and any person, firm or corporation found guilty thereof shall be punishable as set forth in Chapter 1.08 MMC. (Ord. 1085 § 1, 1988).

Chapter 15.12
FIRE HYDRANTS

(Repealed by Ord. 1662)

Chapter 15.16
POLITICAL SIGNS

(Repealed by Ord. 1666)

Chapter 15.20
FLOOD DAMAGE PREVENTION²

Sections:

15.20.010 Purpose.

15.20.020 Methods of reducing flood losses.

15.20.030 Interpretation.

15.20.040 Lands to which this chapter applies.

15.20.050 Definitions.

15.20.060 Adoption of federal flood insurance study as basis for establishing areas of special flood hazard.

15.20.070 Compliance required.

15.20.080 Development permit – Required.

15.20.090 Development permit – Application.

15.20.100 Building inspector – Administrative responsibility.

15.20.110 Building inspector – Duties.

15.20.120 Required.

15.20.130 Anchoring.

15.20.140 Construction materials and methods.

15.20.150 Utilities.

15.20.160 Subdivision proposals.

15.20.170 Review of building permits.

15.20.180 Required.

15.20.190 Residential construction.

15.20.200 Nonresidential construction.

15.20.205 Critical facilities.

15.20.210 Manufactured homes.

15.20.215 Recreational vehicles.

15.20.220 Floodways designated.

15.20.230 Standards for shallow flooding areas (AO zones).

15.20.240 Hearing board.

15.20.250 Variances – Conditions.

15.20.260 Abrogation and greater restrictions.

15.20.270 Warning and disclaimer of liability.

15.20.280 Violation – Penalty.

15.20.010 Purpose.

It is the purpose of this chapter to promote the public health, safety and general welfare, and to minimize public and private losses due to flood conditions in specific areas by provisions designed:

A. To protect human life and health;

B. To minimize expenditure of public money and costly flood control projects;

C. To minimize the need for rescue and relief efforts associated with flooding and generally undertaken at the expense of the general public;

D. To minimize prolonged business interruptions;

E. To minimize damage to public facilities and utilities such as water and gas mains, electric, telephone and sewer lines, streets, and bridges located in areas of special flood hazard;

F. To help maintain a stable tax base by providing for the sound use and development of areas of special flood hazard so as to minimize future flood blight areas;

G. To ensure that potential buyers are notified that property is in an area of special flood hazard; and

H. To ensure that those who occupy the areas of special flood hazard assume responsibility for their action. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.020 Methods of reducing flood losses.

In order to accomplish its purposes, this chapter includes methods and provisions for:

A. Restricting or prohibiting uses which are dangerous to health, safety and property due to water or erosion hazards, or which result in damaging increases in erosion or in flood heights or velocities;

B. Requiring that uses vulnerable to floods, including facilities which serve such uses, be protected against flood damage at the time of initial construction;

C. Controlling the alteration of natural floodplains, stream channels, and natural protective barriers, which help accommodate or channel flood waters;

D. Controlling, filling, grading, dredging, and other development which may increase flood damage; and

E. Preventing or regulating the construction of flood barriers which will unnaturally divert flood waters or which may increase flood hazards in other areas. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.030 Interpretation.

In the interpretation and application of this chapter, all provisions shall be:

A. Considered as minimum requirements;

B. Liberally construed in favor of the governing body; and

C. Deemed neither to limit nor repeal any other powers granted under state statutes. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.040 Lands to which this chapter applies.

This chapter shall apply to all areas of special flood hazards within the jurisdiction of the city of Milton. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.050 Definitions.

Unless specifically defined below, words or phrases used in this chapter shall be interpreted so as to give them the meaning they have in common usage and to give this chapter its most reasonable application.

A. “Appeal” means a request for a review of the building inspector’s interpretation of any provision of this chapter or a request for a variance.

B. “Area of flooding” means a designated AI or AH zone on the Flood Insurance Rate Map. The base flood depths range from one to three feet; a clearly defined channel does not exist; the path of flooding is unpredictable and indeterminate; and velocity flow may be evident. AI is characterized as sheet flow and AH indicates ponding.

C. “Area of special flood hazard” means the land in the floodplain within a community subject to a one percent or greater chance of flooding in any given year. Designation on maps always includes the letters A or V.

D. “Base flood” means the flood having a one percent chance of being equaled or exceeded in any given year. Also referred to as the “100-year flood.” Designation on maps always includes the letters A or V.

E. “Basement” means any area of the building having its floor subgrade (below ground level) on all sides.

F. “Development” means any manmade change to improved or unimproved real estate, including but not limited to buildings or other structures, mining, dredging, filling, grading, paving, excavation or drilling operations or storage of equipment or materials located within the area of special flood hazard.

G. “Flood” or “flooding” means a general and temporary condition of partial or complete inundation of normally dry land areas from:

1. The overflow of inland or tidal waters; and/or

2. The unusual and rapid accumulation of runoff of surface waters from any source.

H. “Flood insurance rate map” means the official map on which the Federal Insurance Administration has delineated both the areas of special flood hazards and the risk premium zones applicable to the community.

I. “Flood insurance study” means the official report provided by the Flood Insurance Administration that includes flood profiles, the flood boundary-floodway map, and the water surface elevation of the base flood.

J. “Floodway” means the channel of a river or other watercourse and the adjacent land area that must be reserved in order to discharge the base flood without cumulatively increasing the water surface elevation more than one foot.

K. “Lowest floor” means the lowest floor of the lowest enclosed area (including basement). An unfinished or flood-resistant enclosure, usable solely for parking of vehicles, building access or storage, in an area other than a basement area, is not considered a building’s lowest floor; provided, that such enclosure is not built so as to render the structure in violation of the applicable nonelevation design requirements of this chapter found at MMC 15.20.190(B).

L. “Manufactured home” means a structure, transportable in one or more sections, which is built on a permanent chassis and is designed for use with or without a permanent foundation when connected to the required utilities. For floodplain management purposes, the term “manufactured home” also includes park trailers, travel trailers, and other similar vehicles placed on a site for greater than 180 consecutive days. For insurance purposes, the term “manufactured home” does not include park trailers, travel trailers and other similar vehicles.

M. “Manufactured home park or subdivision” means a parcel (or contiguous parcels) of land divided into two or more manufactured home lots for rent or sale.

N. “Habitable floor” means any floor usable for living purposes, which includes working, sleeping, eating, cooking or recreation or a combination thereof. A floor used only for storage purposes is not a “habitable floor.”

O. “New construction” means structures for which the start of construction commenced on or after the effective date of the ordinance codified in this chapter.

P. “Recreational vehicle” means a vehicle:

1. Built on a single chassis;

2. Four hundred square feet or less when measured at the largest horizontal projection;

3. Designed to be self-propelled or permanently towable by a light duty truck; and

4. Designed primarily not for use as a permanent dwelling but as temporary living quarters for recreational, camping, travel, or seasonal use.

Q. “Start of construction” includes substantial improvement, and means the date the building permit was issued, provided the actual start of construction, repair, reconstruction, placement or other improvement was within 180 days of the permit date. The actual start means either the first placement of permanent construction of a structure on a site, such as the pouring of slab or footings, the installation of piles, the construction of columns, or any work beyond the stage of excavation; or the placement of a manufactured home on a foundation. Permanent construction does not include land preparation, such as clearing, grading and filling; nor does it include the installation of streets and/or walkways; nor does it include excavation for a basement, footing, piers, or foundation or the erection of temporary forms; nor does it include the installation on the property of accessory buildings, such as garages or sheds not occupied as dwelling units or not part of the main structure.

R. “Structure” means a walled and roofed building including a gas or liquid storage tank that is principally above ground.

S. Substantial Improvement.

1. “Substantial improvement” means any repair, reconstruction, or improvement of a structure, the cost of which equals or exceeds 50 percent of the market value of the structure either:

a. Before the improvement or repair is started; or

b. If the structure has been damaged and is being restored, before the damage occurred. For the purposes of this definition, “substantial improvement” is considered to occur when the first alteration of any wall, ceiling, floor or other structural part of the building commences, whether or not that alteration affects the external dimensions of the structure.

2. The term does not, however, include either:

a. Any project for improvement of a structure to comply with existing state or local health, sanitary or safety code specifications which are solely necessary to assure safe living conditions; or

b. Any alteration of a structure listed on the National Register of Historic Places or a State Inventory of Historic Places.

T. “Variance” means a grant of relief from the requirements of this chapter which permits construction in a manner that would otherwise be prohibited by this chapter. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.060 Adoption of federal flood insurance study as basis for establishing areas of special flood hazard.

The areas of special flood hazard have been identified by the Federal Insurance Administration in a scientific and engineering report entitled “The Flood Insurance Study for the City of Milton,” dated February 17, 1982. This study and its accompanying flood insurance maps and any revisions thereto are hereby adopted by reference and declared to be a part of this chapter. The flood insurance study is on file at the public works department. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.070 Compliance required.

No structure or land shall hereafter be constructed, located, extended, converted, or altered without full compliance with the terms of this chapter and other applicable regulations. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.080 Development permit – Required.

A development permit shall be obtained before construction or development begins within any area of special flood hazard established in MMC 15.20.060. The permit shall be for all structures including manufactured homes, as defined in MMC 15.20.050, and for all development including fill and other activities, also defined in MMC 15.20.050. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.090 Development permit – Application.

Application for a development permit shall be made on forms furnished by the building inspector and may include but not be limited to: plans in duplicate drawn to scale showing the nature, location, dimensions, and elevations of the area in question; existing or proposed structures, fill, storage of materials, drainage facilities, and the location of the foregoing. Specifically, the following information is required:

A. Elevation in relation to mean sea level of the lowest floor (including basement) of all structures;

B. Elevation in relation to mean sea level to which any structure has been floodproofed;

C. Certification by a registered professional engineer or architect that the floodproofing methods for any nonresidential structure meet the floodproofing criteria in MMC 15.20.200; and

D. Description or the extent to which a watercourse will be altered or relocated as a result of proposed development. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.100 Building inspector – Administrative responsibility.

The building inspector is appointed to administer and implement this chapter by granting or denying development permit applications in accordance with its provisions. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.110 Building inspector – Duties.

Duties of the building inspector shall include, but not be limited to:

A. Permit Review. The building inspector shall:

1. Review all development permits to determine that the permit requirements of this chapter have been satisfied;

2. Review all development permits to determine that all necessary permits have been obtained from those federal, state or local governmental agencies from which prior approval is required;

3. Review all development permits to determine if the proposed development is located in the floodway. If located in the floodway, ensure that the encroachment provisions of MMC 15.20.220(A) are met.

B. Use of Other Base Flood Data. When base flood elevation data has not been provided in accordance with MMC 15.20.060, the building inspector shall obtain, review and reasonably utilize any base flood elevation and floodway data available from a federal, state or other source in order to administer MMC 15.20.190 through 15.20.220.

C. Information to Be Obtained and Maintained. The building inspector shall:

1. Where base flood elevation data is provided through the flood insurance study or required as in subsection B of this section, obtain and record the actual elevation (in relation to mean sea level) of the lowest floor (including basement) of all new or substantially improved structures, and whether or not the structure contains a basement;

2. For all new or substantially improved floodproofed structures:

a. Verify and record the actual elevation in relation to mean sea level; and

b. Maintain the floodproofing certifications required in MMC 15.20.090(C);

3. Maintain for public inspection all records pertaining to the provisions of this chapter.

D. Alteration of Watercourses. The building inspector shall:

1. Notify adjacent communities and the Department of Ecology prior to any alteration or relocation of a watercourse, and submit evidence of such notification to the Federal Insurance Administration;

2. Require that maintenance is provided within the altered or relocated portion of said watercourse so that the flood-carrying capacity is not diminished.

E. Interpretation of FIRM Boundaries. The building inspector shall make interpretations, where needed, as to exact location of the boundaries of the areas of special flood hazards (for example, where there appears to be a conflict between a mapped boundary and actual flood conditions). The person contesting the location of the boundary shall be given a reasonable opportunity to appeal the interpretation as provided in MMC 15.20.240 and 15.20.250. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.120 Required.

In all areas of special flood hazards, the standards set out in MMC 15.20.130 through 15.20.170 are required. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.130 Anchoring.

A. All new construction and substantial improvements shall be anchored to prevent flotation, collapse or lateral movement of the structure.

B. All manufactured homes must likewise be anchored to prevent flotation, collapse or lateral movement, and shall be installed using methods and practices that minimize flood damage. Anchoring methods may include, but are not limited to, use of over-the-top or frame ties to ground anchors (reference FEMA’s “Manufactured Home Installation in Flood Hazard Areas” guidebook for additional techniques). (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.140 Construction materials and methods.

A. All new construction and substantial improvements shall be constructed with materials and utility equipment resistant to flood damage.

B. All new construction and substantial improvements shall be constructed using methods and practices that minimize flood damage.

C. Electrical, heating, ventilation, plumbing and air conditioning equipment and other service facilities shall be designed and/or otherwise elevated or located so as to prevent water from entering or accumulating within the components during conditions of flooding. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.150 Utilities.

A. All new and replacement water supply systems shall be designed to minimize or eliminate infiltration of floodwaters into the system.

B. New and replacement sanitary sewage systems shall be designed to minimize or eliminate infiltration of floodwaters into the systems and discharge from the systems into floodwaters.

C. On-site waste disposal systems shall be located to avoid impairment to them or contamination from them during flooding. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.160 Subdivision proposals.

A. All subdivision proposals shall be consistent with the need to minimize flood damage.

B. All subdivisions proposals shall have public utilities and facilities such as sewer, gas, electrical, and water systems located and constructed to minimize flood damage.

C. All subdivision proposals shall have adequate drainage provided to reduce exposure to flood damage.

D. Where base flood elevation data has not been provided or is not available from another authoritative source, it shall be generated for subdivision proposals and other proposed developments which contain at least 50 lots or five acres, whichever is less. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.170 Review of building permits.

Where elevation data is not available either through the flood insurance study or from another authoritative source (see MMC 15.20.110(B)), applications for building permits shall be reviewed to ensure that proposed construction will be reasonably safe from flooding.

The test of reasonableness is a local judgment and includes use of historical data, high water marks, photographs of past flooding, etc., where available. Failure to elevate at least two feet above grade in these zones may result in higher insurance rates. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.180 Required.

In all areas of special flood hazards where base flood elevation data has been provided as set forth in MMC 15.20.060 or in 15.20.110(B), the standards set out in MMC 15.20.190 through 15.20.230 are required. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.190 Residential construction.

A. New construction and substantial improvement of any residential structure shall have the lowest floor, including basement, elevated to one foot or more above base flood elevation.

B. Fully enclosed areas below the lowest floor that are subject to flooding are prohibited, or shall be designed to automatically equalize hydrostatic flood forces on exterior walls by allowing for entry and exit of floodwaters. Designs for meeting this requirement must either be certified by a registered professional engineer or architect or must meet or exceed the following minimum criteria:

1. A minimum of two openings having a total net area of not less than one square inch for every square foot of enclosed area subject to flooding shall be provided.

2. The bottom of all openings shall be no higher than one foot above grade.

3. Openings may be equipped with screens, louvers, or other coverings or devices; provided, that they permit the automatic entry and exit of floodwaters. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.200 Nonresidential construction.

New construction and substantial improvement of any commercial, industrial or other nonresidential structure shall either have the lowest floor, including basement, elevated one foot or more above the level of the base flood elevation; or, together with attendant utility and sanitary facilities, shall:

A. Be floodproofed so that below one foot above the base flood level the structure is watertight with walls substantially impermeable to the passage of water;

B. Have structural components capable of resisting hydrostatic and hydrodynamic loads and effects of buoyancy;

C. Be certified by a registered professional engineer or architect that the design and methods of construction are in accordance with accepted standards of practice for meeting provisions of this section based on their development and/or review of the structural design, specifications and plans. Such certifications shall be provided to the official as set forth in MMC 15.20.110(C).

D. Nonresidential structures that are elevated, not floodproofed, must meet the same standards for space below the lowest floor as described in MMC 15.20.190(B).

E. Applicants floodproofing nonresidential buildings shall be notified that flood insurance premiums will be based on rates that are one foot below the floodproofed level (e.g., a building constructed to one foot above the base flood level will be rated as at the base flood level). (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.205 Critical facilities.

Construction of new critical facilities shall be, to the extent possible, located outside the limits of the base floodplain. Construction of new critical facilities shall be permissible within the base floodplain if no feasible alternative site is available. Critical facilities constructed within the base floodplain shall have the lowest floor elevated to three feet or more above the level of the base flood elevation at the site. Floodproofing and sealing measures must be taken to ensure that toxic substances will not be displaced by or released into flood waters. Access routes elevated to or above the level of the base floodplain shall be provided to all critical facilities to the extent possible. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.210 Manufactured homes.

All manufactured homes to be placed or substantially improved within Zones A1 – 30, AH, and AE shall be elevated on a permanent foundation such that the lowest floor of the manufactured home is one foot or more above the base flood elevation and be securely anchored to an adequately anchored foundation system in accordance with the provisions of MMC 15.20.130(B). (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.215 Recreational vehicles.

Recreational vehicles placed on sites are required to either:

A. Be on the site for fewer than 180 consecutive days;

B. Be fully licensed and ready for highway use, on wheels or jacking system, attached to the site only by quick disconnect type utilities and security devices, and have no permanently attached additions; or

C. Meet the requirements of MMC 15.20.210 and the elevation and anchoring requirements for manufactured homes. (Ord. Ord. 1670 § 1, 2006).

15.20.220 Floodways designated.

Located within areas of special flood hazard established in MMC 15.20.060 are areas designated as floodways. Since the floodway is an extremely hazardous area due to the velocity of floodwaters which carry debris, potential projectiles, and erosion potential, the following provisions apply:

A. Prohibition of encroachments, including fill, new construction, substantial improvements, and other development unless certification by a registered professional engineer or architect is provided demonstrating through hydrologic and hydraulic analyses performed in accordance with standard engineering practice that encroachments shall not result in any increase in flood levels during the occurrence of the base flood discharge.

B. Construction or reconstruction of residential structures is prohibited within designated floodways, except for:

1. Repairs, reconstruction, or improvements to a structure which do not increase the ground floor area; and

2. Repairs, reconstruction or improvements to a structure, the cost of which does not exceed 50 percent of the market value of the structure either:

a. Before the repairs, reconstruction, or repair is started; or

b. If the structure has been damaged, and is being restored, before the damage occurred. Work done on structures to comply with existing health, sanitary, or safety codes or to structures identified as historic places may be excluded in the 50 percent test of subsection (B)(2) of this section.

C. If subsection A of this section is satisfied, all new construction and substantial improvements shall comply with all applicable flood hazard reduction provisions of MMC 15.20.120 through 15.20.230. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.230 Standards for shallow flooding areas (AO zones).

Shallow flooding areas appear on FIRMs as AO zones with depth designations. The base flood depths in these zones range from one to three feet where a clearly defined channel does not exist, or where the path of flooding is unpredictable and where velocity flow may be evident. Such flooding is usually characterized as sheet flow. In these areas, the following provisions apply:

A. New construction and substantial improvements of residential structures within AO zones shall have the lowest floor (including basement) elevated above the highest adjacent grade of the building site, to or above the depth number specified on the FIRM (at least two feet if no depth number is specified).

B. New construction and substantial improvements of nonresidential structures within AO zones shall either:

1. Have the lowest floor (including basement) elevated above the highest adjacent grade of the building site, to or above the depth number specified on the FIRM (at least two feet if no depth number is specified); or

2. Together with attendant utility and sanitary facilities, be completely floodproofed to or above that level so that any space below that level is watertight with walls substantially impermeable to the passage of water and with structural components having the capability of resisting hydrostatic and hydrodynamic loads and effects of buoyancy. If this method is used, compliance shall be certified by a registered professional engineer or architect as in MMC 15.20.200(C).

C. Require adequate drainage paths around structures on slopes to guide floodwaters around and away from proposed structures. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.240 Hearing board.

A. The hearing examiner shall hear and decide appeals and requests for variances from the requirements of this chapter.

B. The hearing examiner shall hear and decide appeals when it is alleged there is an error in any requirement, decision, or determination made by the building inspector in the enforcement or administration of this chapter.

C. Those aggrieved by the decision of the hearing examiner, or any taxpayer, may appeal such decision to the superior court, as provided in Chapter 7.16 RCW.

D. In passing upon such applications, the hearing examiner shall consider all technical evaluations, all relevant factors, standards specified in other sections of this chapter, and:

1. The danger that materials may be swept onto other lands to the injury of others;

2. The danger of life and property due to flooding or erosion damage;

3. The susceptibility of the proposed facility and its contents to flood damage and the effect of such damage on the individual owner;

4. The importance of the services provided by the proposed facility to the community;

5. The necessity to the facility of a waterfront location, where applicable;

6. The availability of alternative locations for the proposed use which are not subject to flooding or erosion damage;

7. The compatibility of the proposed use with existing and anticipated development;

8. The relationship of the proposed use to the comprehensive plan and floodplain management program for that area;

9. The safety of access to the property in times of flood for ordinary and emergency vehicles;

10. The expected heights, velocity, duration, rate of rise, and sediment transport of the flood waters and the effects of wave action, if applicable, expected at the site; and

11. The cost of providing governmental services during and after flood conditions, including maintenance and repair of public utilities and facilities such as sewer, gas, electrical, and water systems, and streets and bridges.

E. Upon consideration of the factors of this section and the purposes of this chapter, the hearing examiner may attach such conditions to the granting of variances as it deems necessary to further the purposes of this chapter.

F. The building inspector shall maintain the records of all appeal actions and report any variances to the Federal Insurance Administration upon request. (Ord. 1670 § 1, 2006; Ord. 1332 § 1, 1997; Ord. 1123 § 1, 1990).

15.20.250 Variances – Conditions.

A. Generally, the only condition under which a variance from the elevation standard may be issued is for new construction and substantial improvements to be erected on a lot of one-half acre or less in size contiguous to and surrounded by lots with existing structures constructed below the base flood level, providing MMC 15.20.240(D)(1) through (11) have been fully considered. As the lot size increases, the technical justification required for issuing the variance increases.

B. Variances may be issued for the reconstruction, rehabilitation, or restoration of structures listed on the National Register of Historic Places or the State Inventory of Historic Places, without regard to the procedures set forth in this section.

C. Variances shall not be issued within a designated floodway if any increase in flood levels during the base flood discharge would result.

D. Variances shall only be issued upon a determination that the variance is the minimum necessary, considering the flood hazard, to afford relief.

E. Variances shall only be issued upon:

1. A showing of good and sufficient cause;

2. A determination that failure to grant the variance would result in exceptional hardship to the applicant;

3. A determination that the granting of a variance will not result in increased flood heights, additional threats to public safety, extraordinary public expense, create nuisances, cause fraud on or victimization of the public as identified in MMC 15.20.240(D), or conflict with existing local laws or ordinances.

F. Variances as interpreted in the National Flood Insurance Program are based on the general zoning law principle that they pertain to a physical piece of property; they are not personal in nature and do not pertain to the structure, its inhabitants, economic or financial circumstances. They primarily address small lots in densely populated residential neighborhoods. As such, variances from the flood elevations should be quite rare.

G. Variances may be issued for nonresidential buildings in very limited circumstances to allow a lesser degree of floodproofing than watertight or dry-floodproofing, where it can be determined that such action will have low damage potential, complies with all other variance criteria except subsection A of this section, and otherwise complies with MMC 15.20.130 and 15.20.140.

H. Any applicant to whom a variance is granted shall be given written notice that the structure will be permitted to be built with a lowest floor elevation below the base flood elevation and that the cost of flood insurance will be commensurate with the increased risk resulting from the reduced lowest floor elevation. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.260 Abrogation and greater restrictions.

This chapter is not intended to repeal, abrogate, or impair any existing easements, covenants, or deed restrictions. However, where this chapter and another ordinance, easement, covenant, or deed restriction conflict or overlap, whichever imposes the more stringent restrictions shall prevail. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.270 Warning and disclaimer of liability.

The degree of flood protection required by this chapter is considered reasonable for regulatory purposes and is based on scientific and engineering considerations. Larger floods can and will occur on rare occasions. Flood heights may be increased by manmade or natural causes. This chapter does not imply that land outside the areas of special flood hazards or uses permitted within such areas will be free from flooding or flood damage. This chapter shall not create liability on the part of the city of Milton, any officer, or employee thereof, or the Federal Insurance Administration, for any flood damages that result from reliance on this chapter or any administrative decision lawfully made hereunder. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

15.20.280 Violation – Penalty.

Any person violating any of the provisions of this chapter shall be guilty of a misdemeanor and shall be punished as provided in Chapter 1.08 MMC. (Ord. 1670 § 1, 2006; Ord. 1123 § 1, 1990).

Chapter 15.24
WASHINGTON STATE ENERGY CODE

(Repealed by Ord. 1662)

Chapter 15.28
POWER CONSERVATION MEASURES

(Repealed by Ord. 1662)

Chapter 15.30
DEDICATION OF PROPERTY

(Repealed by Ord. 1658)

---

Footnotes

¹Code reviser’s note: See Chapter 3.48 for connection fees and permit charges.

²Prior legislation: Ords. 1042 and 892.